technical data sheet micro rf cable assembly lh1 - 0 71- xxx rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 18- 0 page p.o.box 1260 d - 84526 tittmoning germany fax: +49 8684 18 - 499 www.rosenberger.de email: info@rosenberger.de 1 / 4 rf_35/12.04/3.0 all d imensions a re in mm; tolerances: 3mm for a 300mm; 1% for >300mm cables cable group h1 micro coax cable d=1.37mm, center conductor awg30 connector are only sold with cable. picture on data sheet show an assembly example minimum bending rad ius single 4x ? minimum bending radius repeatable 8x ? available v ariants type cable weight [0,1g] lh1 - 071- xxx h1 (rtk013) 4,6*10 - 3 ( g/mm ) * a( mm) xxx: length in mm = ?a?
tec hnical data sheet micro rf cable assembly lh1 - 071- xxx rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 18 - 0 page p.o.box 1260 d - 84526 tittmoning germany fax: +49 8684 18 - 499 www.rosenberger.de email: info@rosenberger.de 2 / 4 rf_35/12.04/3. 0 technical data 15s20 2 - 1h1 all dimensions are in mm; tolerances accordi ng to iso 2768 m - h interface according to 15k101 - 40m rf test switch material and plating connector parts material plating center contact brass 0.15m au over 2 - 3 m ni outer contact spring bronze 0.15m au over 2 - 3 m ni cover spring bronze 0.15m au over 2 - 3 m ni isolator tpx
tec hnical data sheet micro rf cable assembly lh1 - 071- xxx rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 18 - 0 page p.o.box 1260 d - 84526 tittmoning germany fax: +49 8684 18 - 499 www.rosenberger.de email: info@rosenberger.de 3 / 4 rf_35/12.04/3. 0 electrical data impedance 50 ? frequency dc to 6 ghz return loss - 26 db, dc to 2 ghz - 23 db, 2 to 4 ghz - 18 db, 4 to 6 ghz insulation resistance 0.5 x10 3 m? center contact resistance 50 m ? ou ter contact resistance 100 m ? shielding effectiveness > 40 db up to 3 ghz > 35 db up to 6 ghz mechanical data mating cycles ? mating force ? 5 n unmating force ? 1 mated height 2.4 mm environmental data temperature range - 40c to +90c storage temperature - 40c to +90c rohs compliant cable load after mating do not apply higher forces than defined in the picture below. max. 2n max. 2n max. 4n mating and un - mating for the reliable un - mating of the cable connector a special tool is dedicated : un - mating tool 15w00 2 - 000
tec hnical data sheet micro rf cable assembly lh1 - 071- xxx rosenberger hochfrequenztechnik gmbh & co. kg tel.: +49 8684 18 - 0 page p.o.box 1260 d - 84526 tittmoning germany fax: +49 8684 18 - 499 www.rosenberger.de email: info@rosenberger.de 4 / 4 rf_35/12.04/3. 0 usage remarks: 1. the vertical mating axis of the pcb receptacle and the cab le connector has to be aligned during the connecting and a click will confirm that the connectors are mated correctly. 2. the disconnection of the 2 connectors is carried out vertically with the tool 15w00 2 - 000 in the mating axis of the 2 connectors. 3. the co nnectors should not be mated under an extreme angle. 4. avoid the forcefull twisting or deforming of the cable. misalignment max. 5 packing standard x pcs in plastic bag draft date approved date rev. engineering change number name date mi chelmann folke 31.01.07 c.kainzmaier 02.12 .16 f 00 1 6 - 0004 s .hofmeister 0 2.12.16 while the information has been carefully compiled to the best of our knowledge, nothing is intended as represe ntation or warranty on our part and no statement herein shall be construed as recommendation to infringe existing patents. in the effort to improve our products, we reserve the right to make changes judged to be necessary.
|
